CE
Metal Composite Tubular Type Non-Inductive
Resistor for Ultra High Voltage, High Energy
Carbon Metal Composite, Ultra High Voltage Resistor
Micro-Ohm offers the CE series a ultra high voltage, high energy composite type tubular resistor with Corona ring end caps
FEATURES:
Excellent for harsh conditions
Pulse Modulators
Surge Absorbing
Charging/Discharging
Nuclear, Nuclear Fusion
Dust Collecting Systems
High Voltage Rectifier Diode
High Frequency
R, R-C Bank/Tank
See specifications for advantage of the Corona Ring end cap



Specifications
Standard Resistance Tolerance: 10% & 20%, For 5% consult factory
Rated Power & Derating: The rated power shown for each resistor is calculated at 40°C. When used over 40°C the continous working power must be reduced by 10 to 90% of the rated power. This will depending on application. Please consult factory.
Surface Temperature Control: For continous working, the surface temperature must not exceed 100°C. A fan or oil bath should be used at high temperatures.
Short Time Overload: 250°C max. for 1 minute
Corona Ring End Cap: The corona ring end cap provides additional protection to the electrical field during pulsing, high voltage and for low resistance values.
Distance needed between 4 or more resistors in parallel and Power Derating:
Gap Distance
Derating of Rated Power
1.5MM
60%
2.0MM
70%
2.5MM
80%
TCR: 0.15%/°C Typ. (+1500ppm/°C)
VCR (KV/CM)
Resistance Range Ohms
1.5%
2 - 500
2.5%
600 - 1.5K
5.0%
1.6k - To Max.
Load Life Stability: R5% Max.@ Less than 50% of Rated Power and R7% Max.@ 100% of Rated Power, at 500h
Short Time Overload: R2% Typ. for 10 times rated power for 5 seconds
Corona Ring End Cap: Aluminum
The described specifications & dimennsions subject to change without notice.
product guide
TO ORDER PRODUCTS
E mail: microohm@mail.com
Call Toll Free: 1-800-845-5167